Inconel 690 Corrosion-resisting Nickel-base alloy
Equal material :
Chinese standard :0Cr30Ni60Fe10
national standard: NS315
American Standard: N06690
Germany Standard : NiCr29Fe
Inconel 690 alloy is on the basis of Inconel 600 alloy, the chromium content increased to 30%, a new type of evaporator carbon content below 0.04% and the development of nickel base corrosion resistant alloy. It not only has excellent resistance to stress corrosion cracking ability, but also has high strength, good stability and excellent metallurgical processing capability. Characteristics, has been widely used in PWR nuclear power plant on the evaporator tube.
Corrosion-resisting Nickel-base alloy Inconel 690 chemical composition
Ni
|
Cr
|
Fe
|
C
|
Al
|
Ti
|
Mn
|
Si
|
Cu
|
P
|
S
|
Balance
|
30.39
|
8.88
|
0.023
|
0.22
|
0.26
|
0.23
|
0.07
|
0.02
|
0.006
|
0.002
|
Inconel 690 alloy physical property :
Yield strength
|
Tensile strength
|
Elongation
|
350MPa
|
700MPa
|
45%
|
Inconel 690 density : 8.19g/cm
Inconel 690 melting point: 1343-1377 degree
Inconel 690 alloy mechanical property:
Inconel 690 alloy Existence of main products: Forging, bar, sheet, strip, ring, wire, bolts, spring
Inconel 690 alloy chief application:
Inconel 690 alloy is mainly used for the material of nuclear power plant steam generator tubes in pressurized water reactor.
Product
- Nickle alloys & Super alloys
- Stainless steel & Heat resistant steel
- Carbon steel
- Low alloy high strength steel
- High strength steel
- Boiler steel plate
- Shipbuilding steel plate
- Bridge structural steel
- Weathering steel
- Wear resistant steel
- Pipeline steel
- High carbon steel
- Alloy steel
- CQ/DQ/DDQ/CSS/HSS Grade steel
- Hot rolled steel coil
- Cold rolled steel coil
- Pickled & oiled steel coil
- Electrical steel
- Galvanized and prepainted steel
- Shipbuilding angle steel bar
- Shipbuilding bulb flat bar
- Shipbuilding L shape bars
About Us
Manufacture