HC950/1180MS microstructure: mainly with martensite.
HC950/1180MS performance features: high yield ratio, high tensile strength, relatively low elongation, the tendency of delayed cracking should be noticed.
HC950/1180MS main purpose: suitable for cold drawing of simple parts, and roll-forming parts with sections relatively homogeneous, such as bumpers, side door sill reinforcing plate and the inner fender poles etc.
HC950/1180MS steel performance:
Steel grade |
a, b |
Rm' Mpa |
A80mm' % |
|
HC950/1180MS |
950~1200 |
1180 |
3 |
4 |
a. taking R P0.2 in case of indistinct yield, otherwise R eL
b. The sample is the P6 sample in GB/T 228 and the sample direction is longitudinal.
If you are looking for HC950/1180MS Martensitic Steel, or other Martensitic Steels, you can contact our salesmen any time.
- Nickle alloys & Super alloys
- Stainless steel & Heat resistant steel
- Carbon steel
- Low alloy high strength steel
- High strength steel
- Boiler steel plate
- Shipbuilding steel plate
- Bridge structural steel
- Weathering steel
- Wear resistant steel
- Pipeline steel
- High carbon steel
- Alloy steel
- CQ/DQ/DDQ/CSS/HSS Grade steel
- Hot rolled steel coil
- Cold rolled steel coil
- Pickled & oiled steel coil
- Electrical steel
- Galvanized and prepainted steel
- Shipbuilding angle steel bar
- Shipbuilding bulb flat bar
- Shipbuilding L shape bars
