UNS N05500 Equal material : Monle K-500
UNS N05500 Characteristic:
UNS N05500 is also called UNS N05500, and Alloy with 400 identical corrosion resistance, but has higher mechanical strength and hardness. UNS N05500 alloy steel Has good heat resistance and long term stability.
UNS N05500 Corrosion resistant alloy application field :Mainly used in the manufacture of aviation engine operating temperature at turbine vane and turbine blade under 750 degree ; used for fasteners, spring manufacturing ship pump, valve parts; chemical equipment; papermaking equipment the pulp scraping blade.
UNS N05500 alloy can make plates, steel sheet, forging,round steel, alloy wire
UNS N05500 alloy Chemical composition:
|
Ni
|
Fe
|
C
|
Mn
|
Si
|
Ti
|
Cu
|
Al
|
S
|
Min
|
63
|
|
|
|
|
0.35
|
27.0
|
2.30
|
|
Max
|
|
2.0
|
0.25
|
1.5
|
0.5
|
0.85
|
33.0
|
3.15
|
0.01
|
UNS N05500 physical property :
UNS N05500 alloy density: 8.05g/cm3
UNS N05500 alloy steel Melting temperature range: 1288-1343 degree
UNS N05500 alloy minimum mechanical properties value at room temperature :
Alloy
|
Tensile strength MPa
|
Yield strength MPa
|
Elongation A5 %
|
UNS N05500
|
1100
|
790
|
20
|
UNS N05500 alloy steel apply range:
Aviation, shipbuilding, chemical equipment
- Nickle alloys & Super alloys
- Stainless steel & Heat resistant steel
- Carbon steel
- Low alloy high strength steel
- High strength steel
- Boiler steel plate
- Shipbuilding steel plate
- Bridge structural steel
- Weathering steel
- Wear resistant steel
- Pipeline steel
- High carbon steel
- Alloy steel
- CQ/DQ/DDQ/CSS/HSS Grade steel
- Hot rolled steel coil
- Cold rolled steel coil
- Pickled & oiled steel coil
- Electrical steel
- Galvanized and prepainted steel
- Shipbuilding angle steel bar
- Shipbuilding bulb flat bar
- Shipbuilding L shape bars