Corrosion-resisting Nickel-base alloy 0Cr30Ni60 Fe10

Equal material: Inconel 690
National standard: NS315
American Standard: N06690
Germany Standard: NiCr29Fe

0Cr30Ni60Fe10 alloy is on the basis of Inconel 600 alloy, the chromium content increased to 30%, a new type of evaporator carbon content below 0.04% and the development of nickel base corrosion resistant alloy. It not only has excellent resistance to stress corrosion cracking ability, but also has high strength, good stability and excellent metallurgical processing capability.
Characteristics, has been widely used in PWR nuclear power plant on the evaporator tube

&Corrosion-resisting Nickel-base alloy 0Cr30Ni60Fe10 chemical composition

Ni	Cr	Fe	C	Al	Ti	Mn	Si	Cu	P	S
Balance	30.39	8.88	0.023	0.22	0.26	0.23	0.07	0.02	0.006	0.002

0Cr30Ni60Fe10 alloy physical property:

Yield strength	Tensile strength	Elongation
350MPa	700MPa	45%

0Cr30Ni60Fe10 density: 8.19g/cm
0Cr30Ni60Fe10 melting point: 1343-1377 degree
0Cr30Ni60Fe10 alloy mechanical property:
0Cr30Ni60Fe10 alloy Existence of main products: Forging, bar, sheet, strip, ring, wire, bolts, spring

0Cr30Ni60Fe10 alloy chief application:
0Cr30Ni60Fe10 alloy is mainly used for the material of nuclear power plant steam generator tubes in pressurized water reactor.

Product

About Us

Manufacture

Name：
Email：
Tel：
Message：