UNS N04405 corrosion resistant alloy steel
UNS N04405 alloy mechanical properties and corrosion resistance and Alloy 400 basic same, but has better cutting process ability. Suitable for batch manufacture of various types of threaded fasteners,valve parts, etc.
UNS N04405 alloy Chemical composition:
alloy |
Ni min |
Fe |
C max |
Si max |
Mn max |
Cu |
Others |
UNS N04405 |
63.0 |
2.5 |
0.30 |
0.5 |
2.0 |
28.0-34.0 |
0.024 |
UNS N04405 alloy Physical properties:
Tensile strength | Yield strength | Elongation | State |
550 Mpa | 240 Mpa | 40 | Annealing state |
UNS N04405 alloy density: 8.80 mg/m3
UNS N04405 alloy Melting point range: 1300~1350 degree
UNS N04405 alloy Mechanical properties min value (room temperature)
UNS N04405 Product features:
UNS N04405 is a water, chemical solvents, ammonia, chlorine, hydrogen chloride, sulfur acid medium such as sulfuric acid, hydrofluoric acid, hydrochloric acid, phosphoric acid, organic acid, in alkaline medium, salt, and molten salt has good corrosion resistance of nickel base alloy material
UNS N04405 alloy application :
UNS N04405 is used in chemical and petrochemical industry and Marine development, etc. Can be used to manufacture all kinds of heat exchange equipment, boiler feed water heater, oil and chemical pipelines, containers, towers, tank, valves, pumps, reaction kettle, shaft, etc
Product
- Nickle alloys & Super alloys
- Stainless steel & Heat resistant steel
- Carbon steel
- Low alloy high strength steel
- High strength steel
- Boiler steel plate
- Shipbuilding steel plate
- Bridge structural steel
- Weathering steel
- Wear resistant steel
- Pipeline steel
- High carbon steel
- Alloy steel
- CQ/DQ/DDQ/CSS/HSS Grade steel
- Hot rolled steel coil
- Cold rolled steel coil
- Pickled & oiled steel coil
- Electrical steel
- Galvanized and prepainted steel
- Shipbuilding angle steel bar
- Shipbuilding bulb flat bar
- Shipbuilding L shape bars
About Us
Manufacture