BLC cold-rolled steel sheet is used for general shaping and processing of refrigerator and other household appliances hell, oil drums, steel furniture. China Special Steel limited can provide BLC cold-rolled steel including steel grades BLC-JD1, BLC-JD2, BLC-JD3, which are mainly used for the panel of household appliances.
BLC cold-rolled steel sheet mechanical properties:
Grade |
MPa |
MPa |
Elongation %(L0=50mm, b=25mm) not less than |
r90° |
n90° |
||||
mm nominal thickness |
Not less than |
||||||||
<0.60 |
0.6~<1.0 |
1.0~<1.6 |
≧1.6 |
||||||
BLC |
140~270 |
270 |
36 |
38 |
40 |
42 |
_ |
_ |
a when there is no significant yield, RP0.2, otherwise ReL should be used.
b the sample is the P14 sample in GB/T 228 and the sample direction is transverse.
c the requirements of r90 and n90 values apply only to products with the thickness not less than 0.50mm. When the thickness is more than 2.0 mm, the value of r90 is allowed to lower 0.2.
Available range of BLC cold-rolled steel sheet for appliances:
Item |
Nominal size |
|
Thickness |
0.25-3.5 |
|
Width |
800-1830 |
|
Length |
Steel plate |
1000-6000 |
Steel strip |
Coil inside diameter 508,610 |
- Nickle alloys & Super alloys
- Stainless steel & Heat resistant steel
- Carbon steel
- Low alloy high strength steel
- High strength steel
- Boiler steel plate
- Shipbuilding steel plate
- Bridge structural steel
- Weathering steel
- Wear resistant steel
- Pipeline steel
- High carbon steel
- Alloy steel
- CQ/DQ/DDQ/CSS/HSS Grade steel
- Hot rolled steel coil
- Cold rolled steel coil
- Pickled & oiled steel coil
- Electrical steel
- Galvanized and prepainted steel
- Shipbuilding angle steel bar
- Shipbuilding bulb flat bar
- Shipbuilding L shape bars