Alloy A-286

A-286 alloy is an age-hardenable iron base superalloy for applications requiring high strength from -320°F up to 1000°F long time, 1300-1500°F short time. Oxidation resistance is high for continuous service to 1500°F, intermittent to 1800°F. Aqueous corrosion resistance is comparable to 316/316L stainless. Heat treatment according to AMS 5525 requires a solution anneal at 1800°F, air cool. Age at 1325°F for 16 hours and then air cool.

Alloy A-286 usually used in the following industries :
Jet engine components
High temperature fasteners, springs
Non-magnetic cryogenic equipment

Alloy A-286 Nickel base steel chemical composition :

	Cr	Ni	Mo	Co	Va	Al	Ti	B	C	Fe	Mn	Si	P	S
MIN	13.5	24.0	1.0	-	0.1	-	1.9	0.003	-	-	-	-	-	-
MAX	16.0	27.0	1.5	1.0	0.5	0.35	2.35	0.01	0.08	Balance	2.0	1.0	0.025	0.025

Alloy A-286 Nickel base steel Mechanical Properties:

Temperature, °F	70*	70	400	800	1000	1200	1400
Ultimate Tensile Strength, ksi	95*	145	143	138	131	103	64
0.2% Yield Strength, ksi	50*	95	93	93	87	88	62
Elongation, %	40*	24	21	18	18	13	18

Alloy A-286 Nickel base steel Physical properties:
Density: 0.303 lb/inch3
Melting Range: 2350-2460°F

Typical Stress-Rupture Strength 1800°F/1325°F Heat Treat

Temperature, °F	1000	1100
100 Hours, ksi	99	81
1,000 Hours, ksi	88	71

Alloy A-286 Nickel base steel Product form and Specifications:

Product	AMS
Pipe Seamless	AMS 5732
Tube Seamless	AMS 5732
Sheet/Plate	AMS 5525
Ring/Bar/Rod	AMS 5734/5737

China Special Steel Limited is a Alloy A-286 Nickel alloy Sheet/Plate/Strip/Coil/tube/Pipe/ Ring/Bar/Rod/Forging/Fittings/Flange professional manufacturer and supplier. If you have any information about Alloy A-286 Nickel alloy chemical composition, Mechanical property, density,Heat treatment, melting point ,or any other service, please contact with our sales team.

Product

About Us

Manufacture

Name：
Email：
Tel：
Message：